1. Standard configuration of device:
1. Main machine : 01 cabinet
2. Synchronous standard accessories:
Tray : 06 Tray
Instruction manual in Vietnamese : 01 Book
Warranty card : 01 Voucher
Ground wire : 01 Pcs
2. Basic specifications:
- Drying chamber capacity: 80 liters.
- Power voltage: 1 phase x 220VAC 50 / 60Hz ± 10%
- The oven has a temperature control system and time control by the central processor. Accuracy ± 0.50C and ± <1 minute. Stainless steel cabinet inside stainless steel SUS 304.
- Oven drying, set the temperature to display the temperature in numbers.
- The temperature is from 30 0C to 250 0C (0.1 0C step).
- Timing modes:
+ Continuous sterilization drying mode (when no sterilization time is set)
+ The setting of sterilized drying time can be set from 1 minute to 99 hours 59 minutes, the device only calculates the sterilized drying time when the temperature in the chamber reaches the pre-set temperature value (H.hold)
+ Appointment mode to automatically turn on the work machine can be set from 1 minute to 99 hours 59 minutes (D.Delay)
- There is an overheat protector when the temperature exceeds 2600C.
- There is a stirring fan to keep the temperature in the cabinet evenly.
- Inner door with SUS 304 stainless steel, insulated cotton wing made of high-strength electrostatic paint steel material, cabinet-wing gasket with silicol material with - --- - - - temperature resistance ≥ 5000C.
- Safety standard IEC 601/1
Technical indicators table
STT | Model: | CD... TS |
-
| Capacity (liter) | ... lít |
-
| Sterilized drying temperature | 300C ¸ 2500C (± 0,50C). Step set 0,1 0C |
-
| Sterilized drying time (H.hold) | 1 minute ¸ 99h59’ (± <1 minute). Step set 1 minute |
-
| Sterilized delay time (H.Delay) | 1 minute ¸ 99h59’ (± <1 minute). Step set 1 minute |
-
| Use voltage | 1 phase x 220VAC 50/60Hz (± 10%) |
-
| Wing cabinet | With insulation |
-
| Insulation | ≥ 3MW |
-
| Capacity (W) | 3500 (W) ±10% |
-
| Average capacity (W) | 1800 W |
-
| Heat island fan | Yes |
-
| Weight | 150 Kg |